Summary: This user guide will allow users to learn the details about the Installation, and the interface of Bitwar Data Recovery Software. Video Tutorial [su_youtube_advanced url="https://www.youtube.com/watch?v=U1O-kIaL56o" width="auto" height="auto" modestbranding="yes" title="Get Started"] Download Software Go to the Software Official Download Page and download Bitwar Data Recovery Software for Win Version. Software Installation 1. Double-click the Bitwar Setup and start the installation. 2. Choose the Default Language and click OK. 3. Setup will start, continue with Next to the License Agreement. 3. Read through the License Agreement. Then, finished with I Agree. 4. A warning message will show "Do NOT install the data recovery software onto the drive or partition that you want to recover them." and press OK. 5. Browse the Destination Folder for the software. 6. Finally, click Install and Finish to complete the installation. Get to Know about the Software Interface The main interface of Bitwar Data Recovery Software is easy-to-use and well-designed for all users to use. Software Buttons Here are the buttons and icons that users will encounter in Bitwar Data Recovery Software: For the next step about the two recovery modes, click on the link: Get Familiar With the Two Recovery Modes

2020-6-10

Summary: Since macOS High Sierra (macOS 10.13), the system partition may not be accessed by any other third-party software, those who want to use Bitwar Data Recovery for Mac to scan the system partition should at first disable the SIP. For users who don't know how to do so, this article will delineate the steps you need to take. 1. Disable System Integrity Protection for Non-M1 Mac Step 1: Reboot the Mac device into Recovery Mode by pressing Command + R at the same time. Release the key until you see the screen below. Step 2: Move to Utilities and Run the Terminal App. Step 3: Now, type the csrutil disable in Terminal Window, and then press Return to disable the SIP. Step 4: After entering the command, click on the Apple Icon and Choose to Restart Mac Device. 2. Disable System Integrity Protection for M1 Mac Step 1: Reboot the Mac device into Recovery Mode by pressing the Power button until you see the Options Screen shows up. Hit on the Continue Button. Repeat Step 2 and Step 3 from the first method. Note: Enter Y to agree and then the admin password in M1 Mac if typing this command....

2020-6-1

.Summary: This article lays out the most common way for users to root an Android phone on a PC. Prerequisites Make sure you have met the following requirements: Device powered ON At least 50% battery level Internet connection necessary USB Cable (the original one recommended) The Complete Guide to Root an Android Phone Step 1: Download and install KingoRoot Android (PC version). Step 2: Launch the software, and you will see the primary interface. Step 3: Connect your phone to the computer with a USB cable. Note: If the corresponding device driver hasn't been installed on the computer, the software will automatically download and install it. Make sure the internet connection works appropriately; otherwise, the software can't download the driver. Step 4: Enable USB debugging mode on your phone A prompt will pop up on your device; please tap "Always allow from this computer" Note: Users who don't know how to enable USB debugging mode can refer to the following guide: Step 5: Click on ROOT to root. The process should take a couple of minutes. During the rooting, it's ordinary that the device may automatically reboot several times, and users should not perform any operation on the device. Step...

2020-8-1

Summary: Users confounded by how to enable USB debugging mode can refer to the following content to learn it. Android 4.1 and Lower By default, the Developer options menu is available in these versions. Two general paths are shown below. Android 2.0-2.3.x Settings > Applications > Development > USB Debugging Android 3.0- 4.1.x Settings > Developer Options > USB Debugging Android 4.2 and Higher Step 1: Navigate to Settings > System > About Phone > Scroll to the bottom > tap Build number 7 times. Then a prompt will pop up in the lower area of your display and say that you are now a developer. Step 2: Return to the previous page and tap the Developer options above About Phone. Step 3: Scroll down and enable USB debugging. USB debugging mode is a powerful feature aimed at developers or users who, for instance, want to root their phones. After taking the first step toward rooting an Android phone, click the following link to learn the rest of the rooting steps: How to Root an Android Phone (With PC) How to Root an Android Phone (Without PC)

2020-8-1

Summary: If you have video watermarks displayed in different locations at the same video, and you want to remove these annoying watermarks, this article will serve you well as it describes in details on how to use the Segment Trim feature to make video watermark removal happen. Video Watermark Remover To remove different watermark locations from the same video, we'll need to use Video Watermark Remover feature and then add the segment trims on the specific timelines to let the program know where the watermarks are. Below screenshot presents the Segment Trim button that we will use in the following contents. Segment Trim Interface Button Steps to Remove Different Watermark Locations in Same Video 1. Launch Bitwar Watermark Expert and choose Video Watermark Remover from the main interface. 2. Drag or click Add Video option to add video into the software. 3. Select Segment Trim and Highlight the first watermark. Then, set the Segment Timeline by using the Segment settings and click Add. 4. Repeat Step 3 again to add the second segment trim for the second watermark. 5. After adding all the Segment Trims and click Apply to wait for the process to complete. 6. When the process is...

2020-7-6