[Fixed] Files Not Showing In External Hard Drive

How to Recover Lost Files Using Free Data Recovery Software

Before we get on to those solutions, it’s important to know that you should always use a reliable data recovery tool that offers 100% clean and safe data recovery.

We recommend using our effective and user-friendly data recovery software, Bitwar Data Recovery. It can efficiently and quickly recover all your lost data from any internal or external storage device. Besides, Using this software is pretty easy in the light of its straightforward interface.

Now, follow the below steps to recover your data.

Step 1: Open your web browser and go to بيتوارسوفت download center.

Step 2: After you have successfully downloaded the tool, open it, and select the drive from where your data is lost followed by hitting the Next button.

Step 3: Now, click on the scan mode. To recover the data from every corner of your drive, you can select the Quick Scan mode, which is capable of recovering files in a few minutes. If it doesn’t work, you could come back to this stage and use the Deep scan mode. After this, click on التالي.

Step 4: Select the file types for the recovery and press the التالي زر.

Step 5: Preview all your selected files.

Step 6: At last, click on the Recover button to begin the data recovery process.

Multiple Ways to Solve the Files Not Showing in External Hard Drive Issue

Based on what could be the possible causes of the files not showing in the external hard drive issue to take place, we have listed some of the easiest solutions.

Cause 1: The Files Could Be Hidden

At times, the computer shows that the files are missing, but in fact, they are hidden. To see whether that’s the problem facing you, you could follow the following instructions.

Solution 1: 

Step 1: Open موجه الأمر by writing cmd في Windows search box followed by pressing on the enter.

Step 2: Then, انقر بزر الماوس الأيمن on the program and then click on Run As Administrator.

Step 3: Execute the below-given command followed by hitting the enter مفتاح.

Step 4: If executing this command gives nothing, it might suggest that the folder is marked as protected system files, and you need to get on to the second solution.

Solution 2:

If the solution laid out above doesn’t work, you could check if the files are hidden from view by the system.

Step 1: Open Run and type Control folders followed by pressing enter.

Step 2: Switch to the view tab and tick off the show hidden files, drives, and folders option and uncheck the Hide protected operating system files (Recommended) option.

Step 3: Lastly, see whether your files and folders are back or not.

Cause 2: Files Are Missing Due to File System Error

Sometimes, the files may not be seen due to the file system being corrupted or it does not contain a recognized file system. Therefore an effective solution would be to use Chkdsk to cope with some disk-related problems like bad sectors. Refer to these instructions to learn how to use it:

Step 1: Right-click the Start Menu button and then click Command Prompt (Admin).

Step 2: Type in the command and press أدخل:

Step 3: Wait for the process to end. 

Step 4: Reboot your computer to see whether the error persists.

If you face any problems such as Chkdsk cannot open volume for direct access error, you could refer to the link to learn how to solve it. Besides, you can also use Error checking, a graphical version of Chkdsk, by following these steps:

Step 1: Press Win + E to open File Explorer.

Step 2: Right-click on the disk drive that you want to check out and click on خصائص.

Step 3: Switch to the أدوات tab.

Step 4: Click on Check within the Error checking section.

Step 5: Click on Scan drive to confirm your operation.

Cause 3: The “Checkedvalue” Is Infected With a Virus

If you still can’t see any files in the external hard drive after using the methods mentioned above, you could make a bold step, which is to edit the Registry, to fix the issue.

Follow the below steps to fix:

Step 1: Open Run and type Regedit followed by pressing the enter key.

Step 2: After this, select the below route from the Registry editor.

Step 3: Now, check if the value of CheckedValue is 1.

Step 4: If it’s not, delete CheckedValue and create DWOR and rename it as CheckedValue.

Step 5: Lastly, change the value to 1.

Cause 4: Damaged Mirror Image in the Memory

At times the operating system may not get refreshed due to a damaged mirror image in the memory. Therefore you can try to restart the system, then try to reconnect the hard drive to your PC and check whether the files are showing up or not.

استنتاج

The files not showing in the external hard drive issue can take place due to several reasons and prevents the user from accessing the files in the folder by showing no files in the folder.

There is no need to worry if you ever come across this problem, just follow the above mentioned simple solutions. However, if something goes wrong with the data on the faulty drive, we recommend that you use our reliable data recovery software, استعادة البيانات Bitwar, to bring back your valuable data.